Synthesis and Characterization of [Hg(sulfamethoxazolato)2]·2DMSO and[Cu2(μ‐CH3CO2)4(sulfamethoxazole)2]

[Hg(sulfamethoxazolato)₂]·2DMSO ( 1 ) and [Cu₂(CH₃COO)₄(sulfa‐methoxazole)₂] ( 2 ) can be obtained by the reaction of sulfamethoxazole with mercury acetate or copper acetate in methanol. The structures of the two complexes were characterized by single crystal X—ray diffractometry. Compound 1 consists of sulfamethoxazolato ligands bridging the metal ions building an unidimensional chain. Two solvent dimethylsulfoxide molecules are involved via N‐H···O hydrogen bridges. The mercury atom shows a linear primary coordination arrangement formed by two trans deprotonated sulfonamidic nitrogen atoms. The overall coordination around the metal atom may be regarded as a strongly distorted octahedron when the interactions of mercury with four sulfonamidic oxygen atoms [bond distances of 2.761(4) Å—2.971(4) Å] are also considered to build an equatorial plane and the N1 and N1′ atoms [bond distance of 2.037(5) Å] occupy the apical positions. Compound 2 is a dinuclear complex in which the copper ions are bridged by four syn‐syn acetate ligands which are related by a symmetry centre located in the centre of the complex. Each copper atom presents a nearly octahedral coordination where the equatorial plane is formed by four oxygen atoms and an isoxazolic nitrogen atom and the second copper atom occupy the apical positions.     

A fluorescence emission study of the formation of induced premicelles in solutions of polyelectrolytes and ionic surfactants

The interactions between PSS-co-BVE copolymers and ionic surfactants (anionic and cationic) in aqueous solution have been investigated using pyrene as a photophysical probe. Static and dynamic fluorescence determinations have been used to obtain information about the microenvironments formed between both species. Micropolarity studies using the I1/I3 ratio of the vibronic bands of pyrene and the behavior of the I(E)/I(M) ratio between the monomer and excimer emissions show the formation of hydrophobic domains. The interactions between the polyelectrolytes and the oppositely charged surfactants lead to the formation of induced premicelles at surfactant concentrations lower than the cmc of the surfactants. This aggregation process is assumed to be due to electrostatic attraction. At the same concentration, the excimer-to-monomer emission ratio shows its first peak. At higher surfactant concentrations, near the cmc, micelles with the same properties as those found in pure aqueous solution are formed. On the other side, systems containing an anionic surfactant do not show this behavior at low concentrations. There is no apparent dependence of the cac on the composition of the polymer, reinforcing the assumption that the electrostatic interactions induce the formation of the premicelles. The values of the cac's follow the same trend as for the cmc's, DTAC>DTAB>CTAC. The polarity of the induced premicelles, as measured by the I1/I3 ratio, also indicates that the microdomains formed by the longer chain surfactants are more hydrophobic than those of the shorter chain surfactants, as also happens with real micelles.     

Minimal boundaries enclosing a given volume

We prove some facts concerning surfaces of minimal area bounding regions of prescribed volume in ⁿ. The main result we prove is that the mean curvature of such a surface is constant, if possibly a discontinuous function of the enclosed volume. The boundary behaviour of the solutions is also discussed.     

31P{1H}-n.m.r. as a tool for identification of ruthenium isomers containing PPh3 or 1,4-bis(diphenylphosphino)butane ligands. X-ray structures of the cis-{RuCl2(PPh3)2 [4,4′-(-X)2-2,2′-bipy]} complexes [X=-H, -Me, -SMe and (-Cl, -Me)]

A series of cis-{RuCl₂(PPh₃)₂[4,4-(X)₂-2,2-bipy]} [cis-chlorines; X=-H, -Me, -SMe, and (-Cl,-Me)] complexes have had their structures determined by single crystal X-ray diffraction. The geometry of these complexes, also determined in CH₂Cl₂ solution by ³¹P{¹H}-n.m.r. spectroscopy, showed that the chemical shifts for the phosphorus atoms are slightly dependent on the pKa of the 4,4-(-X)₂-2,2-bipy ligands.     

Structural characterization of cardiolipin by tandem quadrupole and multiple-stage quadrupole ion-trap mass spectrometry with electrospray ionization

We report negative-ion electrospray tandem mass spectrometric methods for structural characterization of cardiolipin (CL), a four-acyl-chain phospholipid containing two distinct phosphatidyl moieties, of which structural assignment of the fatty acid residues attached to the glycerol backbones performed by low-energy CAD tandem mass spectrometry has not been previously described. The low-energy MS2-spectra of the [M - H]- and [M - 2H]2- ions obtained with ion-trap or with tandem quadrupole instrument combined with ion-trap MS3-spectra or with source CAD product-ion spectra provide complete structural information for CL characterization. The MS2-spectra of the [M - H]- ions contain two sets of prominent fragment ions that comprise a phosphatidic acid, a dehydrated phosphatidylglycerol, and a (phosphatidic acid + 136) anion. The substantial differences in the abundances of the two distinct phosphatidic anions observed in the MS2-spectra of the [M -H]- ions lead to the assignment of the phosphatidyl moieties attached to the 1' or 3' position of central glycerol. Upon further collisional dissociation, the MS3-spectra of the phosphatidic anions provide information to identify the fatty acyl substituents and their position in the glycerol backbone. The MS2-spectra of the [M - 2H]2- ions obtained with TSQ or ITMS contain complementary information to confirm structural assignment. The applications of the above methods in the differentiation of cardiolipin isomers and in the identification of complex cardiolipin species consisting of multiple molecular structures are also demonstrated.     

Solvent control on the selective, nonselective, and absent response of a partially substituted lower rim calix(4)arene derivative for soft metal cations (mercury(II) and silver(I)). Structural and thermodynamic studies

The solvent control on the ability of a partially substituted lower rim calix(4)arene derivative 5,11,17,23,tetra-tert-butyl[25,27-bis(hydroxy)-26,28-bis(ethylthioethoxy)]-calix(4)arene, 1 to host soft metal cations (Hg(II) and Ag(I)) is demonstrated through 1H NMR, electrochemical (conductance measurements), and thermodynamic characterization of the complexation process in a wide variety of solvents. Solvent-ligand interactions were assessed from 1H NMR measurements involving 1 and various solvents in CDCl3. Thus, the formation of a 1:1 1-CH3CN adduct is reported. As far as metal cations are concerned, depending on the medium their complexation with 1 was only observed for Hg(II) and Ag(I). Thus, in acetonitrile, 1 is more selective for Hg(II) relative to Ag(I) by a factor of 2.2 x 10(3). In methanol the selectivity is reversed to an extent that the affinity of 1 for Ag(I) is 1.4 x 10(3) higher than that for Hg(II). However, 1 is unable to recognize selectively these cations in N,N-dimethylformamide while in propylene carbonate the ability of 1 to interact with these cations is lost. An outstanding feature of thermodynamics emerges when an assessment is made of the ligand effect on the complexation of these cations and analogues calix(4)arene derivatives. Thus, in acetonitrile the thermodynamics of cation complexation by the hydrophilic cavity of a calix(4)arene containing mixed pendant groups is built up from thermodynamic data for the same process involving derivatives with common functionalities at the narrow rim. This is a unique example of the additive contribution of pendant arms in the field of thermodynamics of calixarene chemistry.     

Theoretical and photoluminescence studies on the d10-s2 AuI-TlI interaction in extended unsupported chains

The reactions of solutions of TlPF(6) and OPPh(3) in tetrahydrofuran or acetone with NBu(4)[AuR(2)] (R=C(6)Cl(5), C(6)F(5)) gave the new complexes [Au(C(6)Cl(5))(2)](2)[Tl(OPPh(3))][Tl(OPPh(3))(L)] (L=THF (1), acetone (2)) and the previously reported [Tl(OPPh(3))(2)][Au(C(6)F(5))(2)] (3). The crystal structures of complexes 1 and 2 display extended unsupported chains with short intermolecular interactions between alternating gold(I) and thallium(I) centres. Moreover, the Tl(I) centres show two different types of geometrical environments, such as pseudotetrahedral and distorted trigonal-bipyramidal, due to the presence of solvent molecules that act as ligands in the solid-state structure. Quasirelativistic and nonrelativistic ab initio calculations were performed to study the nature of the intermetallic Au(I)-Tl(I) interactions and are consistent with the presence of a high ionic contribution (80 %) and dispersion-type (van der Waals) interaction with a charge-transfer contribution (20 %) when relativistic effects are taken into account. All complexes are luminescent in the solid state at room temperature and at 77 K. Complexes 1 and 2 show site-selective excitation, probably due to the different environments around the Tl(I) centres. The DFT and time-dependent (TD)-DFT calculations are in agreement with the experimental excitation spectra for all complexes and confirm the site-selective excitation behaviour as a function of the Tl(I) geometrical environment.     

Mechanisms of acid decomposition of dithiocarbamates. 3. Aryldithiocarbamates and the torsional effect

The acid decomposition of some p-substituted aryldithiocarbamates (arylDTCs) was observed in 20% aqueous ethanol at 25 degrees C, mu = 1.0 (KCl, for pH > 0). The pH-rate profiles showed a dumbell shape with a plateau where the observed first-order rate constant k(obs) was equal to k(o), the rate constant of the decomposition of the dithiocarbamic acid species. The acid dissociation constants of the dithiocarbamic acids (pK(a)) and their conjugate acids (pK(+)) were calculated from the pH-rate profiles. Comparatively, k(o) was more than 10(4)-fold faster than alkyldithiocarbamates (alkDTCs) with similar pK(N) (the acid dissociation constant of the parent amine). It was observed that the values of pK(a) and pK(+)were 5 and 8 units of pK, respectively, higher than the expected values from the pK(N) of alkylDTCs. The higher values were attributed to the inhibition of the delocalization of the nitrogen electron pair into the benzene ring because of the strong electron withdrawal effect of the thiocarbonyl group. Comparison of the activation parameters showed that the rate acceleration was due to a decrease in the enthalpy of activation. Proton inventory indicated the existence of a multiproton transition state, and it was consistent with an S to N proton transfer through a water molecule. There are two hydrogens contributing to a secondary SIE, and there are also two protons that are being transferred at the transition state to form a zwitterion followed by fast C-N bond cleavage. The mechanism could also be a concerted asynchronic process where the N-protonation is more advanced than the C-N bond breakdown. The kinetic barrier is similar to the torsional barrier of thioamides, suggesting that the driving force to reach the transition state is the needed torsion of the C-N bond that inhibits the resonance with the thiocarbonyl group and the aromatic moiety, increasing the basicity of the nitrogen and making the proton transfer thermodynamically favorable.     

Surface tension and density of mixtures of 1,3-dioxolane+alkanols at 298.15 K: analysis under the extended Langmuir model

Surface tensions (sigma) for [1,3-dioxolane+methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, and 1-pentanol] and excess molar volumes (v(E)) for [1,3-dioxolane+methanol, ethanol, 1-propanol, 2-propanol, and 2-butanol] at the temperature 298.15 K and normal atmospheric pressure have been determined as a function of mole fractions. The magnitude of these experimental quantities is discussed in terms of the nature and type of intermolecular interactions in binary mixtures. In order to analyze the surface tension behavior, the extended Langmuir (EL) model was used and the results obtained for the systems containing 1,3-dioxolane were compared with those of other formerly published series: [1,4-dioxane+alkanes] and [1,4-dioxane+alcohols].     

Mass spectra of some 2-methyl-3-(o- and p;-R-phenyl)-3,3a,4,5,6,7-hexahydro-2H-indazoles

The mass spectra of twelve 2-methyl-3-(o- and p-R-phenyl)-3,3a,4,5,6,7-hexahydro-2H-indazoles which have potentially useful pharmacological properties are presented.